STA540 baesd Audio Amplifier Kit
This is a stereo amplifier kit designed to make use of theSTA540 power amplifier IC. Once this kit is completed you have a fully functional, two-channel audio amplifier, complete with a standby switch, volume control and indicator LEDs. The kit also includes a 6400BG heatsink for the STA540 to dissipate any damaging heat.
In this kit, the STA540 is configured as a dual bridge amplifier capable of delivering up to 2x 38W (4Ω at 18V). Power supplied to the kit directly powers the STA540 and should be within 8 to 22V.
This kit comes as a bag of parts, you’ll need to solder everything to the PCB. All components are through-hole, so it shouldn’t be too difficult; but this kit is a bit more complex than our other through-hole kits.
1x STA540 Audio Amplifier Kit PCB
1x STA540 Dual/Quad Power Amplifier
1x 6400BG Heatsink
1x LM358 Op Amp
3x LED – Basic Red
1x SPDT Mini Power Switch
5x 10K Ohm
3x 1.0K Ohm
2x 47k Ohm
2x 100k Ohm
2x 10k Giant Trimpot
1x 100uF – 25V
2x 10pF – 200V – 5%
3x 1uF – 50V – -20,+80%
5x 2-Pin Screw Terminal – 3.5mm
4x Nylon Round Female Standoff
5x Phillips Screw with 4-40 Thread
1x #4-40 Hex Nut